地下停車場設計要求引導車流和人流

引導車流和人流，使所有公共區域的導向系統達到有序、便捷及人性化。    

基本要求：導視、醒目、美觀、易于維護管理、可適當融入科技元素。

（一）總體規劃設計要求

根據招標人提供的導向標識系統設計標準版方案，包括但不限于：設計方案簽批圖冊、導向標識平面圖。 

（二） 戶外環境部分

1、區域標志性標識

2、車流導向標識、出租車落/待客區位置標識（出租車落客、待客區域）

3、地下停車場入口位置標識

4、客流綜合信息導向標識

5、輔助標識—營業時間牌、入場須知牌等

6、自行車存放地點標識

7、戶外車流導向標識系統規劃布點

8、戶外客流導向標識系統規劃布點

（三）地下停車場部分

1、地下停車場車流引導標識

2、地下停車場客流引導標識

3、地下停車場墻面及柱面導向裝飾設計

4、地下停車場導向標識系統規劃布點

5、商業公共區域部分：商業公共區域?qū)驑?biāo)識系統規劃布點

6、廣告部分：室外按建筑預留、室內結合商管需求執行

（四）室內公共區域

1、商業綜合信息標識 

2、樓層業態、大型主力店分別指引標識；

3、衛生間、母嬰室指引及位置標識；

4、服務臺指引及位置標識；

5、直梯處樓層經營指示標識及直梯內、外指引標識；

6、方位指引標識；

7、扶梯口立地式樓層指引標識；

8、樓層號標識；

9、消防設施、設備間位置標識；

10、輔助位置標識；

11、警告提示標識必須滿足國家規范及招標人要求；

12、特色標識（綠建標識應按規范要求設置，放置位置應和商管協商一致）。

（五）設計安全技術、設計品質技術要點

1、設計需要滿足《建造標準》與導向標識專業相關的各項要求。

2、投標人須積極配合招標人組織的各類協調會，并組織主要設計人員參會。

Underground parking lot design requires guiding the flow of vehicles and people

Guide the flow of vehicles and people, so that the guidance system in all public areas is orderly, convenient and humane.

Basic requirements: guided, eye-catching, beautiful, easy to maintain and manage, and can be appropriately integrated into technological elements.

(1) Overall planning and design requirements

According to the standard version of the guidance sign system provided by the tenderer, including but not limited to: design scheme signed and approved atlas, guidance sign plan.

(2) Outdoor environment part

1. Regional landmark logo

2. Traffic guidance signs, taxi drop-off/waiting area location signs (taxi drop-off, waiting area)

3. Entrance location identification of underground parking

4. Comprehensive information-oriented identification of passenger flow

5. Auxiliary signs-business hours signs, admission notice signs, etc.

6. Bicycle storage location identification

7. Planning and distribution of outdoor traffic guidance sign system

8. Planning and distribution of outdoor passenger flow guidance sign system

(3) Underground parking lot

1. Traffic guidance signs in underground parking lots

2. Passenger flow guide signs in underground parking lots

3. Oriented decoration design for walls and columns of underground parking lots

4. Planning and distribution of underground parking lot oriented sign system

5. Commercial public area: planning and deployment of the commercial public area-oriented sign system

6. Advertising part: The outdoor is executed according to the reservation of the building and the indoor combined with the commercial management needs

(4) Indoor public areas

1. Commercial comprehensive information identification

2. Separate guidance signs for floor formats and large main stores;

3. Guidelines and location signs for toilets and maternity rooms;

4. Service desk guidelines and location identification;

5. Floor management indication signs at the vertical elevator and the guiding signs inside and outside the vertical elevator;

6. Direction guide mark;

7. Vertical floor guide signs at the escalator entrance;

8. Floor number identification;

9. Location identification of fire-fighting facilities and equipment rooms;

10. Auxiliary location identification;

11. The warning signs must meet the national regulations and the requirements of the tenderer;

12. Characteristic signs (green building signs should be set according to specifications, and the placement position should be negotiated with commercial management).

(5) Design safety technology and design quality technical points

1. The design needs to meet various requirements related to the "Construction Standards" and the major of orientation signs.

2. The bidder shall actively cooperate with various coordination meetings organized by the tenderer and organize the participation of major designers.